15 MW Turbines in Demand For Offshore Projects In Brazil Updated On Wed, Apr 27th, 2022 by Saurenergy Ever since the offshore wind energy projects development were announced in Brazil, most of the players involved in the licensing process for environmental investigations are opting for 15 MW capacity wind turbines. Within the 15 MW capacity turbines, while there are few variations in the technologies being chosen for, the model of Vestas that has […] Read more
Hydrofuel Canada gets Green Ammonia, Hydrogen Cheaper than Fossil Fuels Updated On Tue, Apr 26th, 2022 by Saurenergy Hydrofuel Canada has signed a license agreement with Georgia Institute of Technology for their MAPS system which enables high-yield, sustainable ammonia synthesis from air and water. The technology has unprecedented efficiency which uses a gas-phase electrochemical process. Hydrofuel Canada is engaged in delivering green ammonia and hydrogen along the last mile to its customers. Hydrofuel […] Read more
India’s NIWE and UK’s ORE Catapult Collaborate for Offshore Wind Development Updated On Tue, Apr 26th, 2022 by Saurenergy India’s National Institute of Wind Energy (NIWE) has announced signing of a a Joint Declaration of Intent (JDI) with ORE Catapult of the United Kingdom under which the two wind energy organisations of their respective countries will establish a five-year collaboration programme for the development of wind energy, particularly offshore wind. India currently has zero […] Read more
Global Renewable Capacity Addition in numbers For 2021 from IRENA Updated On Mon, Apr 25th, 2022 by Saurenergy “At the end of 2021, global renewable generation capacity amounted to 3064 GW. Hydropower accounted for the largest share of the global total, with a capacity of 1230 GW,” finds a new report by the International Renewable Energy Agency (IRENA). Solar and wind energy accounted for equal shares of the remainder, with capacities of 849 […] Read more
IESA supports UN’s low carbon tech innovation challenge’22 Updated On Mon, Apr 25th, 2022 by Saurenergy The United Nations Industrial Development Organization (UNIDO) Regional Office in New Delhi has announced the launch of 5th Innovation Challenge on Innovative Low Carbon Technologies. Applications will be accepted until 31st May 2022. The Innovation Challenge is conducted under the Facility for Low Carbon Technology Deployment (FLCTD; https://www.low-carbon-innovation.org/), which is jointly implemented by UNIDO and […] Read more
Lead- Human Resources Updated On Mon, Apr 25th, 2022 by Saurenergy The HR Lead will be responsible for front line strategic human resources support ensuring Human Resources functions and activities run effectively, efficiently, and in accordance with First Solar’s Core Values. Will also lead and support more complex HR initiatives and analysis and special projects as assigned and act as a mentor to HR Generalists to […] Read more
Statkraft inks 300 GWh RE PPA with German cement mfr Updated On Fri, Apr 22nd, 2022 by Saurenergy Statkraft, a hydropower company fully owned by the Norwegian state, has signed a further power purchase agreement (PPA) with OPTERRA, a German cement manufacturer, for the supply of renewable power from onshore wind and solar power. It follows a wind power PPA agreed in 2021 and enables OPTERRA to further transition its plant operations to a […] Read more
Nordex Group receives 1.2 GW turbine orders Q1 2022 Updated On Fri, Apr 22nd, 2022 by Saurenergy Germany-based manufacturer of onshore wind turbines Nordex Group recorded an order intake of 229 turbines with a total capacity of 1,165 MW in the first quarter of 2022 (Q1/2021: 1,247 MW). The share of the efficient and high-margin Delta4000 series amounted to 91 percent (Q1/2021: 73 percent). The Nordex Group received orders from ten European […] Read more
GE unveils turbine tower 3D printing facility in New York Updated On Fri, Apr 22nd, 2022 by Saurenergy Paris-based GE Renewable Energy has inaugurated a new research and development facility that will conduct research on how to 3D print the concrete base of towers used in wind turbines. The research will enable GE to 3D print the bottom portion of the wind turbine towers on-site at wind farms, lowering transportation costs and creating […] Read more