JinkoSolar to Supply 255MWp Solar Panels to One of the Year’s Largest Solar Farms in Australia Updated On Thu, Nov 1st, 2018 by Saurenergy JinkoSolar Holding Co., Ltd. is one of the world’s largest solar module manufacturers, announced today that it has entered into the Contract for the Supply of PV Modules with Decmil Australia Pty Ltd on September 27, 2018, for supply 255MWp of its high efficient solar panels for the Sunraysia Solar Farm (“Project”) developed by Maoneng […] Read more
Trina Solar supplies 17MW to the largest floating PV system in Europe Updated On Wed, Oct 31st, 2018 by Saurenergy Trina Solar Limited (“Trina Solar” or the “company”), a leading total solutions provider for solar energy, announced today that it has supplied 17 megawatts of PV modules to the largest floating PV plant in Europe. The “O’MEGA 1” PV project has been developed by Akuo Energy, France’s leading independent producer of renewable energy, under the specific […] Read more
Hanwha Q CELLS’ Q.FLAT-G5 roof mounting system wins Solar+Power Award for best BOS innovation Updated On Tue, Oct 30th, 2018 by Saurenergy Hanwha Q CELLS Co., Ltd. (“Hanwha Q CELLS” or “The Company”), one of the largest solar cell and module manufacturers in the world, has been voted as the winner of the Solar+Power Awards 2018 in the Solar PV BOS category for its Q.FLAT-G5 solar mounting system for flat rooftops. The Q.FLAT-G5 helps to deliver lower […] Read more
Risen Energy Wins 50MW PV Contract from Bitexco Group’s Arm Updated On Fri, Oct 26th, 2018 by Saurenergy The electricity generated by the project will be provided to EVN, the Vietnamese state grid. Australia-based solar PV panels maker Risen Energy has won the bid for the NHI HA 50MW solar power station project owned by Vietnam-based Bitexco Group’s subsidiary Thap Cham Solar. The company said in a statement that, combined with the contracts won by […] Read more
Reliable Raw Material: strengthening the back bone of pv module! Updated On Fri, Oct 26th, 2018 by Saurenergy Identifying reliable raw material for any product is a crucial to ensure that the product lives for its lifetime. With the competitive market condition along with requirement of being cost competent selecting correct raw material to strive a perfect balance between commercial and technical terms in the product is a challenge. The scenario in case […] Read more
JinkoSolar Ranked as Top Performer for 4th Consecutive Yr by DNV GL Updated On Fri, Oct 26th, 2018 by Saurenergy The global quality assurance and risk management company, DNV GL, tested over 300 bills of material (BOM) for more than 50 module manufacturers. One of the leading solar module manufacturers JinkoSolar Holding (JinkoSolar) has been recognized as a Top Performer on DNV GL’s 2018 PV Module Reliability Scorecard for the fourth consecutive year. Commenting on […] Read more
Trina’s 400W+ Solar Modules May Prove to be Boon for Cities with Lesser Space Updated On Thu, Oct 25th, 2018 by Saurenergy These 400W+ solar modules, based on half-cut multi-busbar technology, will be helpful in significantly increasing the power density as compared existing technologies. In today’s scenario where many hi-tech cities across the world are dealing with scarcity of land, Chinese solar giant Trina Solar’s R&D team is currently working on developing a 400 watt-plus (400W+) modules […] Read more
JA Solar Gets BIS Certification in India Updated On Thu, Oct 25th, 2018 by Saurenergy After a long test and strict audit, on its poly modules and mono PERC products, the company has recently received BIS certification. Shanghai-based high-performance solar power products maker JA Solar has received the certification for its photovoltaic (PV) modules from the Bureau of Indian Standards (BIS). After a long test and strict audit, on its […] Read more
Joint Research by Fraunhofer ISE and Heraeus for High-performance Solar Modules: Novel Cell Connector Increases Power by 1.9 W Updated On Thu, Oct 25th, 2018 by Saurenergy The Fraunhofer Institute for Solar Energy Systems ISE and Heraeus are researching and optimizing novel, selectively coated cell connectors in a joint research project. The Selectively Coated Ribbon (SCRTM) cell connector achieves an average gain of 1.9 W in conventional 60-cell solar modules. The connector can be used in industrial PV module manufacturing without system […] Read more
