Canadian Solar to showcase the Dymond and SuperPower modules at 2016 SNEC PV Power Expo

Canadian Solar will showcase the Dymond module and SuperPower module at the 2016 SNEC PV Power Expo. The Expo is scheduled for May 24 through May 26, 2016 in Shanghai New International Expo Center.

The Dymond module is a double glass module, and is available in 72-cell CS6X-P-FG Dymond and 60-cell CS6K-P-FG Dymond configurations. Each module comes with state-of-the-art product design and unique features:

• Built with heat-strengthened glass to replace the traditional polymer back-sheet
• More resistant to Potential Induced Degradation (PID), with anti-PID cells and encapsulation material
• Well suited for harsh environments like high humidity, high temperature, sandstorm and ultraviolet (UV) conditions
• Lower annual power degradation, with the first year annual power degradation of 2.5% and 0.5% each year afterwards, resulting in a 30-year power warranty
• Designed to enable 1500V applications to lower overall system cost

Canadian Solar has shipped hundreds of megawatts of Dymond modules to its global customers since its launch in 2014 and received great market feedback.

The SuperPower CS6K-295MS module on the other hand will make its debut at this exhibition. Consisting of 60 Passivated Emitter and Rear Cell (PERC) monocrystalline solar cells, the SuperPower module boasts power output of 295 watts. The SuperPower module also comes with following feature:-

• Better low light performance, with the average module efficiency under low light irradiance condition (0.2 Sun) reaching over 97.5% of that under Standard Test Condition (STC)
• Lower temperature coefficient improves the module’s per watt actual power output
• Lower Light Induced Degradation (LID) – LID is over 30% lower than that of a standard mono solar module
• 5 bus bar cell design enhances product reliability
• A robust and reliable solution for seaside/farmland PV system installation
• A 25-year linear power output warranty and a 10-year product warranty on materials and workmanship

Mass production of the SuperPower module began in Q1 2016 and further volume ramp-up is expected for 2016 and beyond.

“We are delighted to showcase our groundbreaking Dymond and SuperPower modules at this exhibition,” commented Dr. Shawn Qu, Chairman and Chief Executive Officer of Canadian Solar. “Canadian Solar is committed to delivering innovative, high-performance and cost competitive products to our global customers to meet their diversified demands for solar products. We sincerely invite every one of you to come to our booth, # W5-330, at SNEC to explore more of Canadian Solar’s industry-leading product offerings.”