Industrial and Commercial Photovoltaic Power Stations Enter the Grid-Parity Era

According to the BNEF analysis report, the current installed capacity of China’s industrial and commercial rooftop PV market has exceeded 200 GW. As urbanization continues to advance, this number is likely to reach 300 GW by 2040.

‘IV scan + high-end configuration’ helps Industrial and Commercial Photovoltaic power stations enter the grid-parity era:

With the start of the parity phase, industrial and commercial project developers will usher in a new round of development opportunities. As the major consumers of electricity, industrial and commercial users must pay a fixed electricity fee for part of annual operating costs.

The installation of photovoltaic power plants on the roof of a factory or enterprise can reduce the energy consumption of enterprises and fully utilize idle resources.It helps energy conservation and emission reduction. At the same time, the addition of an on-site PV system will economic benefits to the enterprise.

Nowadays, even if there is no state subsidy support, a company can invest in the construction of photovoltaic power plants, and the return on investment (ROI) can be very attractive

Case#1:

Zhejiang LangDi Group

Project Name: Zhejiang Langdi Group Co., Ltd. 3.7MW Distributed Photovoltaic Power Generation

Project Location: Yuyao, Zhejiang

Project capacity: 3.7MW

Inverter: GCI-70K-HV

The installed capacity of the project is 3.7 MW, the total utilization area of the project is about 50,000 square meters, and the total investment is $2,811,961. And the self-use ratio is more than 85 percent. The project uses 52 pcs of Ginlong (Solis) Technology GCI-70K-HV inverters. This type of inverter has 4 channels of MPPT, which can access 12 strings of components, which can effectively reduce the component loss. The module is 340W single crystal with a maximum input power of 84kW.

Case#2:

Changshu Zhu Dian Auto Parts Co., Ltd.

Project Name: 700 KW Distributed Photovoltaic Power Generation Project of Changshu Zhu Dian arts Co., Ltd.

Location: Changshu, Jiangsu

Project capacity: 700 KW

Inverter: GCI-50K

The installed capacity of the project is 700 KW, the total utilization area of the project is about 8,500 square meters, and the total investment is USD 6,104,208. The first year of power generation is about 700,000 degrees. The project uses a total of 12 pcs of Ginlong Technology GCI-50K inverters. This model inverter has 4 MPPTs, each of which can be connected to 12 strings of components. With ASP-S1-85 solar modules, the maximum input power is 60 kW. Support 1.2 times DC over-distribution, effectively support the optimal capacity ratio of the project, maximize the power generation and increase the revenue

Case#3:

Zhejiang Shenji Titanium Industry

Project Name: Zhejiang Shenji Titanium Industry Co., Ltd. 1.15 MW Distributed Photovoltaic Power Generation

Project Location: Anji, Zhejiang

Project capacity: 1.15 MW

Inverter: GCI-60K

The installed capacity of the project is 1.15 MW, the total utilization area of the project is about 12,000 square meters, and the total investment is USD 6,540,222. Self-use ratio of more than 90 percent. A total of 16 Ginlong Technology GCI60K inverters are used. This type of inverter has 4 MPPTs and can access 12 strings of components. The module is single crystal 285W with a maximum input power of 72 kW. As the “brain centre” of the photovoltaic system, the correct selection of the inverter directly determines the revenue of the entire photovoltaic power station.

Ginlong (Solis) Technology can provide complete system solutions for industrial and commercial projects, provide strong technical support for the safe and stable operation of photovoltaic power plants, and answer the concerns of new owners. A Solis C&I power station owner recently spoke to the Ginlong Technical Service Team leaders about working with Ginlong (Solis) Technologies saying, “the power station has operated perfectly. Looking at the steady daily power generation, I am very satisfied with the power plant operations and would praise the outstanding performance of the Solis inverter!”